Explore our elite range of space-saving mechanisms and custom-tailored industrial lifts engineered for worldwide compatibility.
A professional structural overview detailing the critical measurements, safety clearances, and mechanical principles required to comply with EN 1493 standards.
In modern automotive workshops and private residential properties, planning the installation of a vehicle lift requires rigorous mechanical design and attention to regulatory frameworks. The search term CE Certification 2 Post Lift Layout Dimensions reflects a major demand from civil engineers, architects, and workshop owners who need precise architectural and structural specifications to integrate heavy machinery into their buildings safely.
A CE-compliant 2-post lift must adhere strictly to the European standard EN 1493:2010, which details safety rules, verification methods, and mechanical load calculations for vehicle lifts. Under these regulations, dimensions are not merely about whether a lift fits into a bay; they dictate the structural integrity of the concrete substrate, column verticality, safety margins around walking zones, and the dynamic stresses placed upon the building structure during operation.
Overall height dictates the clearance required between the upper crossbar (or the column tips) and the ceiling structure. Standard clear-floor lifts require heights ranging from 3,600mm to 4,200mm. The overall width (typically between 3,200mm and 3,500mm) must leave at least 600mm of emergency egress clearance to adjacent equipment, columns, or walls on both sides.
Asymmetric layouts angle the lift columns back by approximately 30 degrees, placing the vehicle's center of gravity further back. This allows the front doors to open fully without contacting the columns. Symmetrical layouts place the columns directly opposite each other, which is ideal for larger commercial transport vans and heavy trucks with centered loads.
A CE-certified layout cannot compromise on the concrete base. In general, 2-post lifts require a minimum concrete depth of 150mm to 200mm, with a compressive strength of at least 3,000 PSI (or class C20/25). Structural calculations must verify that the anchor bolts are positioned away from expansion joints and edge lines to prevent shear failure.
How new vehicle segments, urban architecture limitations, and electrification are reshaping global lift layout designs.
The global lift industry is shifting rapidly in response to automotive trends. The rise of electric vehicles (EVs) introduces new design challenges due to their heavy battery packs, which are typically integrated flat along the chassis floor. Traditional 2-post lift swing arms often struggle to reach the structural pick-up points on EVs without applying pressure to the delicate battery casing.
Consequently, manufacturers are widening the standard drive-through clearance of their lifts while introducing low-profile, telescoping lift arms. These specialized arms sit closer to the ground, allowing low-slung performance vehicles and flat-battery EVs to drive over them without interference.
Moreover, space optimization in major metropolitan hubs like New York, London, and Tokyo has driven a surge in multi-level parking solutions. Mechanical parking lifts, such as double-level two-post stackers, now serve dual purposes: storage and routine chassis servicing, offering a hybrid answer to dense urban zoning demands.
Qingdao Cherish is an integrated industry and trade enterprise dedicated to the design, manufacture, and global supply of intelligent parking equipment and industrial processing solutions. With strong engineering capabilities, modern manufacturing resources, and extensive international project experience, we deliver reliable systems that support modern urban infrastructure and industrial development worldwide.
Founded by a team of experienced engineers and international business professionals, the company was established with a clear mission: to provide efficient, durable, and sustainable equipment solutions through continuous innovation, precision manufacturing, and customer-focused service. From initial concept design and technical planning to production, delivery, and after-sales support, we ensure consistent quality and dependable performance throughout every project lifecycle.
Today, our business operates through two specialized divisions to better serve diverse market needs and provide focused expertise across different industries.
Focused expertise to deliver custom solutions for modern smart cities and industrial automation.
Our Parking Systems Division focuses on the development and production of car parking lifts, automated parking systems, car stackers, and customized parking solutions. Designed to maximize space utilization and operational efficiency, our systems are widely applied in residential buildings, commercial facilities, hospitals, and urban developments. Through continuous engineering innovation and strict quality control, we deliver safe, reliable, and space-saving parking solutions tailored to global project requirements.
Our Industrial Equipment Division provides advanced powder coating lines and sewage treatment plant solutions for industrial applications. These systems are engineered to improve production efficiency, surface finishing quality, and environmental sustainability. By integrating automation technology with durable system design, we help clients optimize manufacturing processes while meeting modern environmental standards and regulatory requirements.
Engineered to perform, delivered globally. Our track record stands behind every project we undertake.
Optimizing costs and accelerating lead times through automated, vertically integrated production lines.
Purchasing capital equipment from overseas requires not only competitive pricing but also reliable delivery and stable supply chains. Qingdao Cherish integrates China's advanced Industry 4.0 manufacturing principles to ensure that every two-post lift, car stacker, and automated parking system meets stringent international standards without delays.
By using fully automated robotic welding arms, CNC laser cutting stations, and unified shot-blasting processes, we reduce human error to near zero. Our vertical integration guarantees that raw steel is converted into finished, powder-coated structural parts in a continuous quality loop. This system minimizes lead times, protects against global material price fluctuations, and guarantees that spare parts remain available throughout the lifetime of the equipment.
Explore real-world case scenarios and structural highlights for our main parking products.
The Triple-Level Parking Lift is a game-changer for maximizing parking space. Designed to accommodate both sedans and SUVs, this lift offers a practical solution for those seeking efficient car storage. Whether you're a homeowner looking to make the most of a limited garage or a business looking to optimize parking in a commercial setting, this lift makes parking and retrieval easy and convenient. With its durable construction and space-saving design, the Triple-Level Parking Lift is ideal for any environment where parking space is at a premium. Say goodbye to cramped spaces and hello to smart, effortless parking!
The Double-Level 2 Post Car Parking Lift offers different loading capacities of 2300kg or 2700kg, catering to your specific parking needs. With a maximum lifting height of 2100mm, it efficiently accommodates most vehicles while optimizing available space. The height of their columns may vary, so it's important to consider the ceiling height, especially if you plan to install it indoors. This lift is ideal for both residential and commercial applications, providing a reliable solution for parking two vehicles in the same footprint. Make the most of your space without compromising on convenience or safety.
The Tilting Parking Lift is the perfect solution for spaces with low ceilings, such as basements. Its unique design allows the platform to tilt at an angle, optimizing parking in tight spaces. With an adjustable lifting height ranging from 1400mm to 1800mm, it offers flexibility to suit different vehicle sizes and parking requirements. With a maximum loading capacity of 2000kg, this lift ensures safe and efficient storage for your car. Ideal for both residential and commercial applications, the Tilting Parking Lift provides a space-saving, practical solution for parking in areas where conventional lifts may not fit.
The Multi-Level 2-6 Levels Automatic Puzzle Parking System is a highly popular and cost-effective solution compared to other automatic parking systems. Designed for both indoor and outdoor use, this system maximizes parking space by stacking vehicles in multiple levels. It is fully customizable to fit your available land area, ensuring efficient use of space. The system can accommodate a wide range of vehicles, including sedans and SUVs, making it suitable for most cars. With its automated operation and space-saving design, the Multi-Level Puzzle Parking System offers a reliable and practical solution for both residential and commercial parking needs.
The Elevator with Double Rails for cars or cargo is a customizable solution designed to fit your available land space. It can be used both as a freight elevator and a car elevator, offering flexibility for various applications. One of its key features is that it doesn't require a pit, making it easier to install in locations like workshops or car showrooms. With its sturdy construction and efficient operation, this elevator is perfect for transporting vehicles or heavy cargo between different levels. It's an ideal solution for businesses that require reliable and safe vertical transportation.
The Quad-Level Car Stacker, a 4-post parking lift, is designed to store up to 4 cars vertically, offering a highly efficient space-saving solution. With the same structure, it can also be configured as a 3-level system, providing flexibility based on your needs. This mechanical parking lift is built for durability, capable of handling both sedans and SUVs. It can be installed indoors or outdoors, making it ideal for residential or commercial spaces where maximizing parking capacity is essential. Strong and reliable, the Quad-Level Car Stacker is perfect for efficient and safe vehicle storage, optimizing your available space.
The Underground Scissor Lift with double decks is a customized solution designed to fit your specific pit size. This innovative lift allows cars to be hidden underground, providing a sleek and space-saving solution, especially suited for villa yards. Popular in Australia, this lift maximizes parking space while keeping your vehicles discreetly stored. Its design can be tailored to your preferences, allowing for customization in terms of decoration and functionality. With its smooth operation and efficient use of space, the Underground Scissor Lift offers both practicality and aesthetic appeal, making it ideal for luxury homes or modern properties.
Delivering precision systems to minimize industrial emissions and optimize manufacturing efficiency.
Our Powder Coating Lines represent one of the most advanced coating technologies in the world today. Their primary advantage lies in emitting little to no volatile organic compounds (VOCs). Compared to traditional liquid coatings, powder coatings form more uniform and thicker layers without issues like dripping or sagging. Additionally, overspray can be efficiently recycled, achieving nearly 100% material utilization. Our systems generate less hazardous waste and have lower capital and operational costs. Powder-coated surfaces exhibit superior consistency in appearance across both horizontal and vertical surfaces, making it easy to achieve special effects that are difficult to replicate with traditional liquid processes.
With the acceleration of urbanization and rapid industrial development, wastewater treatment plants have become critical components of environmental protection. We are committed to providing efficient and reliable solutions, including industrial wastewater and domestic sewage recycling, water reuse, and zero-discharge treatment systems; full membrane and reverse osmosis desalination systems; as well as pre-treatment filtration equipment for seawater desalination, pure water, and ultra-pure water. Through innovative technologies, we aim to support sustainable water resource management and contribute to global environmental protection.
Adaptable layout specifications designed for specific climates, ceiling restrictions, and commercial requirements.
Engineered for high-volume commercial shops requiring 115-volt or 208/230-volt single-phase configurations. These layouts incorporate heavy-duty symmetrical columns to secure larger pick-up trucks and delivery vans while maintaining a safe drive-through width of 2,500mm.
Perfect for low-clearance residential garages in historic city centers. Featuring our tilting stacker design, these units tilt the vehicle at a slight angle, reducing the minimum ceiling height requirement from 3.6 meters down to only 2.9 meters while providing total safety.
Designed for port cities and island resorts with high humidity and salt spray exposure. These structures are treated with complete hot-dip galvanization (ISO 1461), ensuring the components resist oxidation for over 25 years without requiring paint maintenance.
Crucial planning answers directly from our structural design office to help you prepare your project site.
We require a minimum thickness of 150mm (approx. 6 inches) of cured concrete. The concrete must have a compressive strength rating of at least 3,000 PSI and must be fully cured for 28 days before anchoring to prevent shear cracking under load.
Symmetric arms lift the vehicle dead-center, which is best for front-to-back balanced loads. Asymmetric arms allow the vehicle to be positioned further back, which shifts the door opening path clear of the vertical columns, making vehicle access easier for technicians.
Yes. Outdoor installations require our special weather protection package, which features a galvanized structure, sealed IP54 control panels, and a protective hydraulic pump shroud to shield the electric motor and fluid reservoir from rain and dust.
EN 1493 requires safety locks that automatically engage, protection against hydraulic hose bursts, and load drop prevention. Undergoing CE testing guarantees that each unit can lift 1.5 times its rated capacity under static conditions without deformation.
Maintain layout efficiency and safe vehicle stacking with our tested components.
Cherish
